HVAC Contractors for Commercial Buildings – 5 Things To Look For

HVAC (Heating, Ventilation, and Air Conditioning) systems are used for the heating and cooling of residential and commercial buildings. They also have an extra benefit that most people are unaware of: many HVAC systems are able to purify the air inside a building while maintaining a constant temperature.

Such systems are able to remove contaminants that include chemicals, organic compounds, and odors. If these systems are well taken care of they help create a fresh and comfortable environment in the building wherever they have been installed.

As these systems are proving to be the most efficient and cost effective out on the market, companies all over the country are installing them in increasing numbers, and there are many reasons why you should have a system installed as well. There are, however, some things to be aware of when installing your own HVAC system.

Once you have decided you are interested in installing a HVAC system, be sure to look for these 5 things to ensure your search for an installer is hassle-free:

1. First, be sure to find a company that is certified. On occasion there may be uncertified companies advertising their services, but in truth may be unqualified to do so. Ultimately it is you the customer that would suffer if the HVAC unit were installed incorrectly, so always be sure to verify the company you choose is certified to perform the service you require.

2. Always give close attention to the experience of the company. It is never good to hire an inexperienced company. Before hiring, ask the company’s representatives to show you their recent projects; this will help you know which company is your best selection.

3. Once you have selected a certified company, then obtain a written contract. This way you will be able to see what services they will be performing for you and will allow you to avoid any financial issues in the future.

4. See whether the company provides post-installation services or not. There are companies that claim that they will offer post-installation services, but they do not do so in an effective way. Therefore, this service should be in written in the contract as well. These maintenance and repair services will be essential for the upkeep of your HVAC system, and will be more effective and efficient if preformed by the same company that installed the system in the first place.

5. Finally, make sure that the company has safety and health policy for its employees. Accidents are, unfortunately, always possible, so in order to protect yourself from footing the bill in the case of an accident, be sure that the company has insurance for your own protection.

With these five things to look for, you should have no problem determining which company to use to install a new HVAC system. Remembering these five tips will save you money, time, and effort; and hopefully will keep you from any unnecessary or unforeseen expenses during and after your system is installed.

Gauge Your Entrepreneurial Readiness – With an Entrepreneur Test

What does an entrepreneur test look like? How do you measure whether you’re ready to start your own business? With the number of idled or displaced workers in the broad economy today, many are wondering if it’s time to invest in their own business start-up.

Those are just two of the questions that online business opportunity seekers are asking themselves as they research the home based business and alternative or part-time career categories for answers.

If your present career or work situation has been impacted by the job slowdown, you may be seriously considering a leap into an entrepreneurial enterprise of your own. For many, especially if you require something with low start-up costs, the most popular and accessible business models are:

Affiliate marketing

Network marketing

Freelancing/independent contracting

The Internet offers the online entrepreneur a vast array of profitable niches to concentrate on. Most successful home business marketers that I’ve personally observed often combine different revenue streams in a blended approach to diversify their income sources. That often means overlapping any or all of the 3 home business models listed above.

Those who have relied on steady employment working for some other person or company often have to consider if they are really prepared to start their own business. That’s where a career assessment test or entrepreneur test can help. An alternative or parallel career option enjoys unprecedented popularity today because the Internet has reduced or eliminated the traditional barriers of entry to an entrepreneur’s career.

I recently took a free, online entrepreneur test to see what it entails. I can tell you this. Research reveals that there are 16 dimensions or characteristics that are important for starting a business. These entrepreneurial traits fall into three general categories: Personality, Skills and Motivation. As an example, you are asked to self-assess your…

Personality:

• Action-oriented: Your go-getting ability. Your tendency to “do” rather than sit around and think.

• Persistence: Your determination to meet your goals.

• Risk Tolerance: Your willingness to expose yourself to possible loss. Your attraction to, or comfort level with, risk.

Skills:

• Leadership: Your ability to guide and inspire others to work toward a common goal.

• Networking: How well you build and maintain relationships.

• Persuasion: Your ability to influence others.

Motivation:

• Ambition: Your desire to achieve success.

• Autonomy: Your desire to make your own decisions and control your own destiny.

• Financial Motivation: How important money and financial freedom are to you.

After having completed the questionnaire of this particular free, online entrepreneur test I took, I was confronted with the ratings system they use for determining my entrepreneurial acumen -based on my answers. I happened to be rated a pretty average “silver”. That means I fell below the gold and platinum levels. That translates to being in the 25th to 50th percentile of strongly possessing (or not), the proven character traits that successful entrepreneurs exhibit.

Well, considering I’m already putting the entrepreneur/online marketer lifestyle to test, it remains to be seen how much I will have to continue brushing-up on those 3 major business owner aptitudes.

What’s fun and actually kind of revealing is that based on your individual test results, it will identify your 5 greatest strengths and 5 most obvious weaknesses. The program states it is useful to consider your strengths–the tools and talents you already have in place–which will serve you in the pursuit of starting your own business.

Test scores come with helpful tips to get the most out of your individual personality traits so you can leverage those strengths to your best advantage.

Likewise, it goes on to suggest ways you can improve those areas that you tested low or sub-par in with recommended tips. Of course as can be expected of anything offered “free” on the internet, there always comes: “And now a word from our sponsors”. So there’s ample opportunity to opt-in to the advertised and featured educational resources that appear multiple times as you continue moving through the test program.

The advertising on the entrepreneur test I took is “opt-in” only and at no time exceeded the limits or bounds of correct internet etiquette we would expect. You just have to take careful notice where to click to proceed with the test uninterrupted, if that’s your choice.

So was it worth the time to take this entrepreneur test? Yes. For me, it actually identified areas that I already suspected needed improvement. I think it’s helpful to be able to recognize and perhaps be reminded of character traits that still could use some further development which you may now focus on.

If you dream of being your own boss and wonder if the entrepreneur lifestyle is right for you, gauging your strengths/challenges in the areas of personality, motivation and skills can be a helpful start. When you see that an online business career “leap” is really something that can be organized into a series of small, incremental steps, it might just be enough to push you over the edge.

Which Software Do You Need to Run a CNC Hot Wire Foam Cutting Machine?

A CNC hot wire foam cutter is a computer controlled machine used for mainly cutting Polystyrene foam and similar materials, such as polypropylene and polyethylene. The machine consists of a wire running between 2 towers, which is heated via hot wire power supply, thus melting and cutting the foam into the desired shape. The towers can move in an X-Axis (right-left) and a Y-Axis (up-down).

Cutting the foam is done in 3 basic steps:

1. Drawing the desired shape to be cut.

2. Converting the shape into G-Code

3. Running the machine with the software to execute the desired shape.

Any Cad tool, such as Auto Cad or Corel Draw can be used for drawing the shape, as long as the file can be saved in a DXF format. CAD means Computer-aided Design. It is a modeling tool used to design curves and figures in 2 dimensional space (2D) or curves, surfaces and objects in three-dimensional space (3D). There are various CAD files in the market. More recommended ones include Instant Engineer 14, which can be purchased online for few dollars, DesignCAD, AutoCAD and TurboCAD. Another Cad tool software is DevFoam, that combines both the drawing and the G-Code generation. It is a user friendly application for cutting foam with a 4 Axis CNC machine.

Next step is to convert the shape into G-Code. The G-Code is another name for the computerized tool by which we tell the machine what to cut and how to cut it. For the conversion one can use software such as DeskCNC, DevCad or FoamWorks.

DeskCNC was originally designed for a 3 Axis CNC Router machines. It was later on modified to enable a 4 Axis foam cutters to run as well.

FoamWorks is known for its simplicity and being a user friendly software. It is designed to drive a 4 Axis foam cutter via a parallel port of any windows based computer. It can cut any shape, but works best for cutting RC wings.

For the last stage of running the machine, software such as Mach3 and DeskCNC can be used. The Mach3 program is a G-Code reader. It allows you to turn your PC computer into a 4 Axis CNC controller for machining and cutting. It is an operating system for running the CNC hot wire foam cutter. It was originally developed for the home hobbyist, and later modified for use for any CNC machine operation for industrial use.

Fuji Newest 4.0 Road Bike Review

One of the most highly respected and sought after brands in road bikes remains the Fuji Bicycle company in Japan. The company boasts an astounding 100 plus year history in the bicycle manufacturing industry with many notable accomplishments along the way such as the establishment of the now world renowned Tour de Japan race and the first to introduce the Shimano Dura Ace part group on its bikes. The following article will give a Fuji Newest 4.0 Review, one of the company’s premier road bikes.

At a modest 500 dollars for a road bike, the 4.0 delivers a lot in an economical package. It features a 24 speed Shimano SL-R400 down tube shifter great for use in a variety of road inclines and environments. The chain is a KMC Z-72 and the brake components are made of a forged aluminum and are dual pivot R-310A’s. Spokes are manufactured of 14G stainless steel and the stem is made from proprietary adjustable road aluminum. All in all a very durable light weight construction overview for a smaller price.

Many users reported that the strengths of the bike are its durable frame and comfortable ride. Some drawbacks were lack of smoothness or a lag in shifting and the actual placement of the down tube shifters claiming that they can be bumped with the knees. Many reviewers were first time road bike owners and commented on the great price combined with value in features. Many said it was an excellent entry-level bike for novice or intermediate road riders. Other positive comments are that the bike is ultra light and easy to carry, great braking capabilities, smooth ride and easy setup. Additional negative comments included a sticky or clunky shifting, practical but ineffective shifter placement, geared more for racing than novice or intermediate riding, and pedals do not accommodate toe clips.

The most frequent comment from users came back to the price of the bike, which was thought to be reasonable across all reviews. Compared to many other professional race bikes on the market, the price of the 500 dollar 4.0 is incredibly reasonable. Buyers can expect to pay at least 3 times that for models that are slightly more sophisticated from other manufacturers. For example, a 2010 Shimano Ultegra, which has similar features and construction to the 4.0, however it retails for up to 2,000 dollars. Overall, the Newest 4.0 has a good array of practical and useful features for the more economical price.

3 Ways to Start an Auto Repossession Business Without a Tow Truck

With auto repossessions at an all-time high, getting into the repo business has never looked more lucrative.  And while you can make up to $500 per repo’ed car, investing in a tow truck isn’t cheap.

The good news is, you probably don’t need a tow truck to start your own repo business.  Here’s 3 ways you can get started in the repo industry on a shoestring budget:

Tip #1 – Partner With A Locksmith and Literally Drive The Repo Cars Away!

Nowadays, finance companies keep key codes on file for every car they own.  The key codes are a “blueprint” that tells locksmiths exactly how to create a key the same as the original.

Even if the bank doesn’t have the key codes, you can find companies online that will supply key codes for any domestic or foreign vehicle in less than an hour.  All you need to give them is the make, model and VIN number.

With your original key in hand, you can have someone follow you to the repo site and you can drive the car away!

Tip #2 – Work From Home and Help Banks Track Down Repo Cars

You don’t need to be a repo man to earn a living in the repossession industry.  You can start out by helping banks or dealerships track down hard-to-find debtors.  This service is called skip-tracing.  And they’re willing to pay big money for it since their cars are worth thousands of dollars.

You can charge $30-$100/hour to provide skip tracing services to banks – or even other repossession companies.  Of course, you’ll need to invest time and money in good training, but it’s well worth it considering you could make $60,000 starting out – without a degree!

Tip #3 – Become A Repo Job Broker

If you don’t like working nights and dealing with confrontational people, you could setup a web site to get repossession job leads in your town, and sell those leads to other repo businesses.  Then, as you gain more experience in the repo industry, you could take on more and more jobs yourself.

While these money-making tips are no substitute for having the right repossession tools, they’ll help you make money to pay for the equipment you’ll need later on!